Dedykowany do sprężarek BLDC, pomp ciepła i jednostek CDU
Optidrive Coolvert Funkcje
Zaawansowany przemiennik częstotliwości dedykowany do sprężarek BLDC, pomp ciepła i jednostek CDU
-
Optistick Smart Compatible
- Narzędzie do szybkiej konfiguracji.
-
Open Connectivity & Easy Commissioning
- Seamless connectivity with any application controller
- Built in RS485 Modbus RTU
- Bluetooth connectivity available via Optistick Smart
- External TFT keypad available
- Drive status LEDs
-
Intuitive Keypad Control
- 1 x 200–240V (± 10%): 7.0A, 12A, 16A, 20A All single phase drives with active PFC
- 3 x 380–480V (± 10%): 14A, 18A, 24A
Selectable motor types
- AC Induction (IM)
- AC Permanent Magnet (PM)
- Brushless DC (BLDC)
- Synchronous Reluctance (SynRM)
- Line Start Permanent Magnet (LSPM)
-
Optipad option
- Optipad Remote Keypad with TFT Display
-
Control Terminals
- Pluggable control and communication terminals
- STO SIL3 Safe Torque Off for system protection, TUV approved
- Programmable, predefined input and output functions:
- - Start / Stop (Enable / Disable)
- - PTC motor thermal protection (0-10V, 4-20mA)
- - Relay (drive healthy / trip)
Practical Thermal Management
Through panel mounting allows the drive power electronics to be cooled by the chilled air. Allowing OEM’s to select the smallest electrical panel size, for the control electronics, while safely removing the heat generated by the drive, and maintaining IP rating.
Coldplate Version
Specifications are identical to the standard Coolvert except the heatsink is replaced with a flat aluminium coldplate. This allows the Coolvert to be fixed to a device containing its own heat exchanger which then dissipates the heat from the drive.
Environmental
- Compact design with through panel mounting
- Wide operating temperature: −20˚C to 60˚C
- IP20 rated front enclosure, IP55 at the rear Coldplate version available
- Coated PCBs meet class 3C2 in accordance with EN60713-303
- Built-in EMC filter class C1 in accordance with EN61800-3-2004
- Low harmonic design compliant with; EN61000-3-2, (1 phase 200-230V input), and EN61000-3-12, (3 phase 380-480V input).
Open Connectivity & Easy Commissioning
- Seamless connectivity with any application controller
- Built in RS485 Modbus RTU
- Bluetooth connectivity available via Optistick Smart
- External TFT keypad available
- Drive status LEDs
Optidrive Coolvert
-
Otwarta komunikacja z dowolnym sterownikiem (wyjmowane zaciski śrubowe)
-
Optistick Smart
Szybkie klonowanie parametrów i interfejs Bluetooth do bezprzewodowej komunikacji z komputerem
-
Zdalna klawiatura
(wiele języków)
-
Praca w zakresie od -20⁰C do +60⁰C
(duży zakres warunków otoczenia)
-
Wiele opcji montażu:
Poprzez zabudowę panelową
Montaż na płycie tylnej
Montaż Coldplate
(mniejsze panele) -
Bezpieczne wyłączenie momentu obrotowego
STO-SIL 3
