MVS Specification
Supply
Mains Voltage
MVSxxxx-V02
3 x 2300 VAC (± 10%)
MVSxxxx-V03
3 x 3300 VAC (± 10%)
MVSxxxx-V04
3 x 4160 VAC (± 10%)
MVSxxxx-V06
3 x 6600 VAC (± 10%)
MVSxxxx-V07
3 x 7200 VAC (± 10%)
MVSxxxx-V11
3 x 11000 VAC (± 10%)
MVSxxxx-V13
3 x 13800 VAC (± 10%)
Control Voltage
MVSxxxx-xxx-C12
110 VAC to 130 VAC (+ 10% / - 15%)
or 220 VAC to 240 VAC (+ 10% / - 15%)
or 220 VAC to 240 VAC (+ 10% / - 15%)
All models
500 VA, single phase
Mains Frequency
45 Hz to 66 Hz
Rated Power Frequency Withstand Voltage (Ud)
MVSxxxx-V02 ~ MVSxxxx-V04
11450 VAC
MVSxxxx-V06 ~ MVSxxxx-V07
20000 VAC
MVSxxxx-V11 ~ MVSxxxx-V13
35000 VAC
Rated Lightning Impulse Withstand Voltage (BIL) - Overvoltage Category III (Up)
MVSxxxx-V02 ~ MVSxxxx-V07
45 kV
MVSxxxx-V11
85 kV
MVSxxxx-V13
95 kV
Form Designation
Bypassed semiconductor motor starter form 1
Control Inputs
Start (Terminals C23, C24)
24 VDC, 8 mA approx
Stop (Terminals C31, C32)
24 VDC, 8 mA approx
Reset (Terminals C41, C42)
24 VDC, 8 mA approx
Input A (Terminals C53, C54)
24 VDC, 8 mA approx
Input B (Terminals C63, C64)
24 VDC, 8 mA approx
Motor Thermistor (Terminals B4, B5)
Outputs
Relay Outputs
10 A @ 250 VAC/ 360 VA
10 A @ 30 VDC resistive
10 A @ 30 VDC resistive
Main Contactor (Terminals 13, 14)
Normally Open
Bypass Contactor (Terminals 23, 24)
Normally Open
Run Output/ PFC (Terminals 33, 34)
Normally Open
Output Relay A (Terminals 43, 44)
Normally Open
Output Relay B (Terminals 51, 52, 54)
Changeover
Output Relay C (Terminals 61, 62, 64)
Changeover
Analog Output (Terminals B10, B11)
0-20 mA or 4-20 mA
Environmental
Degree of Protection
Power Assembly
IP00
Controller
IP54/ NEMA 12
Operating Temperature
-10 °C to + 60 °C
Storage Temperature
-25 °C to + 55 °C
-25 °C to + 70 °C (< 24 hours)
-25 °C to + 70 °C (< 24 hours)
Relative Humidity
5% to 95% Relative Humidity
Pollution Degree
Pollution Degree 3
Vibration
Designed to IEC 60068 Test Fc Sinusoidal
4 Hz to 13.2 Hz: ± 1 mm displacement
13.2 Hz to 200 Hz: ± 0.7 g
4 Hz to 13.2 Hz: ± 1 mm displacement
13.2 Hz to 200 Hz: ± 0.7 g
EMC Emission
Equipment Class (EMC)
Class A
Conducted Radio Frequency Emission
10 kHz to 150 kHz: < 120 - 69 dB µV
0.15 MHz to 0.5 MHz: < 79 dB µV
0.5 MHz to 30 MHz: < 73 dB µV
0.15 MHz to 0.5 MHz: < 79 dB µV
0.5 MHz to 30 MHz: < 73 dB µV
Radiated Radio Frequency Emission
0.15 MHz to 30 MHz: < 80-50 dB µV/m
30 MHz to 100 MHz: < 60-54 dB µV/m
100 MHz to 2000 MHz: < 54 dB µV/m
30 MHz to 100 MHz: < 60-54 dB µV/m
100 MHz to 2000 MHz: < 54 dB µV/m
This product has been designed for Class A equipment. Use of the product in domestic environments may cause radio interference, in which case the user may be required to employ additional mitigation methods.
EMC Immunity
Electrostatic Discharge
6 kV contact discharge, 8 kV air discharge
Radio Frequency Electromagnetic Field
80 MHz to 1000 MHz: 10 V/m
Fast Transients
5/50 ns (main and control circuits)
2 kV line to earth, 1 kV line to line
2 kV line to earth, 1 kV line to line
Surges 1.2/50 µs (main and control circuits)
2 kV line to earth, 1 kV line to line
Voltage dip and short time interruption
5000 ms (at 0% nominal voltage)
(safe shutdown)
(safe shutdown)
Short Circuit
Rated short-circuit current, symmetrical, fused (Class E2)
MVSxxxx-V02 ~ MVSxxxx-V07
48 kA
MVSxxxx-V11 ~ MVSxxxx-V13
75 kA
Power Assembly (SCRs bypassed)
20 W approx
Controller
10 W approx
Standards Approvals
C√
EMC requirements
UL/ C-UL
UL 508, UL 347
CE
EMC EU Directive
Marine
Lloyd's Register